436351045816 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASU 4,7x3,5 mm side push tact switch with boss design, SMD version

3,7
4
2
3
1
+0
6,4 -0,2
O 0,6
h 0,10 Ref.
O 0,2
4,7
3
1
4
2
4,4
6,8
P.C.B. MOUNTING PLAN
3
1
4
2
SCHEMATIC
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
1OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Bounce:
10ms max.
MATERIAL
>Cover: Stainless Steel
>Stem: PA46, UL HB
>Frame: PA46, UL HB, color Black
>Contact: Stainless Steel with silver
>Terminal: Copper alloy with silver plating
>Tape: Polyimide tape
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
PN
Force
436 351 045 816 160g ± 50gf
436 331 045 822 220g ± 50gf
Color of Stem Life cycle
White
Black
200.000
100.000
Stroke
0,25 mm ± 0,1
0,30 mm +0,1 / -0,2
2,6
Scale - 5:1
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Projection
GENERAL TOLERANCE
.x = +/- 0,2
Before incorporating the components into any equipments in the field
.xx = +/- 0,15
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
Date
Name
disaster prevention, medical, public information network etc. where higher
Drawn 10-03-22 Jelisarow
safety and reliability are especially required or if there is possibility of
direct damage or injury to human body, Wurth Elektronik must be asked
e remove Contact cladding 14-10-30 DaF Checked 10-03-22
Hsu
for a written approval.
d revised MatchCode 14-07-24 AL
c Bounce 10ms max. 14-04-14 DaF
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability functions
b
description 12-06-06 WJ
or performance, the sufficient reliability evaluation-check for the safety
a
warning text 11-10-28 WJ
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
must be performed before by the user before usage.
REV
FILE
DATE BY EDV NO 4363x10458xx.dft
Basic material
DESCRIPTION
WS-TASU 4,7x3,5 mm side push tact switch with boss design,
SMD version
Scale
5:1
Drawing.- No.
Position
SIZE
4363x10458xx
A4
System :Solid Edge V20