434331013822 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASU Side push Tact Switch, SMD version

3
4
1
2
4,7
3,5
3,9 ±0,15
h 0,1 ref.
0,5
1,7
Scale - 6:1
Recommended P.C.B Layout
1
2
3
4
2,2
1,6
4,05
SCHEMATIC
1
2
3
4
SPECIFICATION
>Rating :
>Contact Resistance :
Initial :
After Life test :
>Insulation Resistance :
>Dielectric Strength :
>Stroke :
>Bounce :
50mA, 12VDC
100mΩ max.
1Ω max.
min. 100MΩ at 500VDC
250VAC for 1 minute
0.2 +0.2 / -0.1mm
10ms max.
Material
>Cover :
>Stem :
>Frame :
>Contact :
>Terminal :
>Tape :
Stainless Steel
PA46 UL HB
PA46 UL HB, color Black
Stainless Steel with Silver
Copper Alloy with Silver
Polyimide tape
Soldering Information
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD-020 Hot Air
>Hand soldering under 350°C for 3sec. max
>Flex board design not recommended
Environmental
Storage condition :
Operation condition :
Compliance :
-40°C ~ +85°C
-40°C ~ +85°C
Lead Free , ROHS , Reach
Packaging information
>Tape & Reel
Part number
434 331 013 822
Force
220g ±80gf
Color of Stem
White
Life cycle
100.000
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
com. [phone] - 0
CREATED
DaF
CHECKED
JLi
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WS-TASU
Side push Tact Switch,
SMD version
TECHNICAL REFERENCE
_________
ORDER CODE
434 331 013 822
SCALE
1:1
1.1
REV.
new information by Soldering Information
FILE
2015-07-23 DaF www.we-online.de
DATE
BY ^[e-mail]
SIZE
3.5x2.9x1.35mm
STATUS
Released
DATE
2015-04-27
BUSINESS UNIT
eiSos
PAGE
1 /1
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.