434113043826 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASV 6,0x3,5mm Tact Switch_J-Bend SMD version

3,0
1,5
3,5
1
2
6,0
7,2 u0,2
3,4
7,4
P.C.B. Layout
1
2
Schematic
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
1OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.25 +/- 0.1 mm
>Bounce:
10ms max.
MATERIAL
>Cover: Stainless Steel
>Stem: LCP UL 94V-0
>Frame: LCP UL 94V-0
>Contact: Stainless Steel with silver
>Terminal: brass with silver plating
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
PN
Force
Color of Stem Life cycle
434 123 xxx 816
434 113 xxx 826
434 123 xxx 836
160g ± 50gf
260g ± 70gf
360g ± 90gf
Black
White
Salmon
50.000
30.000
50.000
Height
H
-043
-050
-043
-050
-043
-050
Scale - 5:1
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
Projection
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Date
Name
Drawn 10-07-08 Jelisarow
Checked 10-07-08
Hsu
d remove Contact cladding _{14-11-04 DaF}
c revised MatchCode 14-07-24 AL
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability functions
b
Bounce 10ms max. 14-04-11 DaF
or performance, the sufficient reliability evaluation-check for the safety
a
warning text _{11-10-28 WJ}
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
must be performed before by the user before usage.
REV
FILE
DATE BY EDV NO 4341x3xxx8x6.dft
Basic material
DESCRIPTION
WS-TASV 6,0x3,5mm Tact Switch_J-Bend SMD version
Scale
5:1
Position
Drawing.- No. 4341x3xxx8x6
System :Solid Edge V20
SIZE
A4