431183015816 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASV 5x5mm Tact Switch with ground terminal, J-Bend SMD version

q 3,4 ±0,2
O 2,0
GND 0,5
2,5
5,1 ±0,3
5,0 ±0,15
GND
2
4
1
3
GND
0,5
3,7
1,0
GND
2
4
1
3
GND
3,8
5,4
P.C.B. MOUNTING PLAN
Grounded Terminal
can be effective even if not soldered
GND
2
4
1
3
GND
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
20mA, 15VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.25 +0.05 / - 0.1mm
>Bounce:
10ms max.
MATERIAL
>Cover: Copper alloy
>Stem: LCP UL 94V-0
>Frame: LCP UL 94V-0, color Black
>Contact: Stainless Steel with silver
>Terminal: Copper alloy with silver plating
>Tape: Polyimide tape
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
PN
431 183 015 816
431 153 015 826
Force
160g ± 50gf
260g ± 50gf
Color of Stem
Black
White
Life cycle
1.000.000
200.000
SCHEMATIC
Scale - 5:1
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Projection
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where higher _f remove Contact cladding _{14-11-04 DaF}
safety and reliability are especially required or if there is possibility of
direct damage or injury to human body, Wurth Elektronik must be asked
e revised MatchCode 14-07-24 AL
for a written approval.
d Bounce 10ms max. 14-04-11 DaF
c
warning text 11-10-28 WJ
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability functions
b
Stroke Tolerance was +/- 0,15 _{11-08-30 WJ}
or performance, the sufficient reliability evaluation-check for the safety
a ^{General Tolerance was +/- 0,2} 11-08-26 WJ
must be performed before by the user before usage.
REV FILE
DATE BY
GENERAL TOLERANCE
.x = +/- 0,1
Date
Drawn 10-07-13
Checked 10-07-13
Name
Jelisarow
Hsu
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
EDV NO 4311x30158x6.dft
Basic material
DESCRIPTION
WS-TASV 5x5mm Tact Switch with ground terminal, J-Bend SMD
version
Scale 5:1
Position
Drawing.- No. 4311x30158x6
System :Solid Edge V20
SIZE
A4