431181008816 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASV 5x5mm Tact Switch with ground terminal, SMD version

GND 0,5
2,5
h 0,10 Ref.
6,2 ±0,2
5,0 ±0,15
O 3,20
GND
2
4
1
3
GND
GND
1,0
2
4
GND
GND
1
3
4,8
7,2
P.C.B. MOUNTING PLAN
Grounded Terminal
can be effective even if not soldered
GND
2
4
1
3
GND
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
20mA, 15VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.25 +0.05 / - 0.1mm
>Bounce:
10ms max.
MATERIAL
>Cover: Copper alloy
>Frame: LCP UL 94V-0, color Black
>Contact: Stainless Steel with silver
>Terminal: Copper alloy with silver plating
>Tape: Polyimide tape
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
PN
431 181 008 816
431 151 008 826
Force
160g ± 50gf
260g ± 50gf
Color of Stem
No actuator
No actuator
Life cycle
1.000.000
200.000
SCHEMATIC
Scale - 5:1
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability
functions or performance, the sufficient reliability evaluation-check for the
safety must be performed before by the user before usage.
Projection
f remove Contact cladding 14-11-03 DaF
e
revised MatchCode 14-07-24 AL
d
Bounce 10ms max. 14-04-11 DaF
c
warning text
11-10-28 WJ
b Stroke Tolerance was +/- 0,15 11-08-30 WJ
a General Tolerance was +/- 0,2 11-08-26 WJ
REV
FILE
DATE BY
GENERAL TOLERANCE
.x = +/- 0,1
.xx = +/- 0,15
Date
Drawn 10-07-13
Checked ^10-07-13
Name
Jelisarow
Hsu
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
EDV NO 4311x10088x6.dft
Basic material
DESCRIPTION
WS-TASV 5x5mm Tact Switch with ground terminal, SMD version
Scale
5:1
Position
Drawing.- No. 4311x10088x6
System :Solid Edge V20
SIZE
A4