431153008826 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASV 5x5mm Tact Switch with ground terminal, J-Bend SMD version

GND0.5
2,5
5,1 ±0,3
5,0 ±0,15
O 3,20
GND
2
4
1
3
GND
0,5
3,7
1,0
GND
2
4
1
3
GND
3,8
5,4
P.C.B. MOUNTING PLAN
Grounded Terminal
can be effective even if not soldered
GND
2
4
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Rating:
20mA, 15VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.25 +0.05 / - 0.1mm
>Bounce:
10ms max.
MATERIAL
>Cover: Copper alloy
>Frame: LCP UL 94V-0, color Black
>Contact: Stainless Steel with silver
>Terminal: Copper alloy with silver plating
>Tape: Polyimide tape
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
1
3
GND
PN
431 183 008 816
431 153 008 826
Force
160g ± 50gf
260g ± 50gf
Color of Stem
No actuator
No actuator
Life cycle
1.000.000
200.000
SCHEMATIC _{Scale - 5:1}
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability
functions or performance, the sufficient reliability evaluation-check for the
safety must be performed before by the user before usage.
Projection
GENERAL TOLERANCE
.x = +/- 0,1
.xx = +/- 0,15
Date
Name
f remove Contact cladding 14-11-04 DaF Drawn 10-07-13 Jelisarow
e revised MatchCode 14-07-24 AL _{Checked 10-07-13}
Hsu
d Bounce 10ms max. 14-04-11 DaF
c
warning text 11-10-28 WJ
b ^{Stroke Tolerance was +/- 0,15} 11-08-30 _WJ
a ^{General Tolerance was +/- 0,2} 11-08-26 WJ
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
REV FILE
DATE BY EDV NO 4311x30088x6.dft
Basic material
DESCRIPTION
WS-TASV 5x5mm Tact Switch with ground terminal, J-Bend SMD
version
Scale
5:1
Position
Drawing.- No. 4311x30088x6
System :Solid Edge V20
SIZE
A4