430481035816 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TASV 6x6mm washable Tact Switch, SMD version

TECHNICAL CHARACTERISTICS
1
2
SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.25 + 0.2 mm / - 0.1 mm
>Bounce
10ms max.
6,2 ±0,2
O 3,0
3
5,0
4
9,0
P.C.B. MOUNTING PLAN
MATERIAL
>Cover: Stainless Steel
>Stem: LCP UL 94V-0
>Frame: LCP UL 94V-0, color Black
>Contact: Stainless Steel with silver
>Terminal: Brass with silver plating
>Tape: Polyimide tape
P.C.B. MOUNTING FACE
8,0 ±0,2
h 0,10 Ref.
0,7
5,8
1
2
3
4
SCHEMATIC
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Hand soldering under 350°C for 3 sec. max
WASHABLE DEFINITION
Please do not submerse washable products into water or cleaning agents
or put them in locations exposed to water or liquids completely.
When cleaning by hand (brushing), please do not use excessive force on
our switch to avoid malfunction afterwards, because you could deform
function relevant areas or you could damage sealing functions.
Do not clean washable series immediately after soldering. The cleaning
agent may be absorbed into the switch through respiration while the switch
cools.
1
2
3
4
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability
functions or performance, the sufficient reliability evaluation-check for the
safety must be performed before by the user before usage.
Projection
e remove Contact cladding 14-11-03 DaF
d revised MatchCode 14-07-24 AL
c Bounce 10ms max. 14-04-11 DaF
b washable definition 14-01-31 DaF
a
warning text 11-10-28 WJ
REV
FILE
DATE BY
Scale - 5:1
PN
Force
Color of Stem Life cycle
430 481 xxx 816 160g ± 50gf
430 471 xxx 826 260g ± 50gf
430 451 xxx 836 360g ± 50gf
Black
White
Salmon
1.000.000
500.000
200.000
-025
-031
-035
H ØD H ØD H ØD
2.5 3.0 3.1 3.0 3.5 3.0
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Basic material
Date
Drawn 09-09-10
Checked 09-09-10
Name
Jelisarow
Hsu
DESCRIPTION
WS-TASV 6x6mm washable Tact Switch,
SMD version
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
EDV NO 4304x1xxx8x6.dft
Scale
5:1
Position
SIZE
Drawing.- No. 4304x1xxx8x6
A4
System :Solid Edge V20