430456043736 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-TATV 12x12mm washable Tact Switch, THT version

TECHNICAL CHARACTERISTICS
O 7,0
12,5 ±0,1
P.C.B. MOUNTING PLAN
SPECIFICATION
>Rating:
50mA, 12VDC
>Contact Resistance:
Initial:
100mOHM max.
After Life Test:
2OHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
250VAC for 1 minute
>Stroke:
0.3 ± 0.1 mm
>Bounce:
10ms max.
MATERIAL
>Cover: Stainless Steel
>Stem: LCP UL 94V-0
>Frame: PA9T UL 94V-0, color Black
>Contact: Stainless Steel with silver
>Terminal: copper alloy with silver plating
>Tape: Polyimide tape
0,3
+1,0
0,6
12,5 -0,5
1,0
+1,0
14,0 -0,5
q 12,0
1
2
3
4
SCHEMATIC
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max.
>Hand soldering under 350°C for 3 sec. max
WASHABLE DEFINITION
Please do not submerse washable products into water or cleaning agents
or put them in locations exposed to water or liquids completely.
When cleaning by hand (brushing), please do not use excessive force on
our switch to avoid malfunction afterwards, because you could deform
function relevant areas or you could damage sealing functions.
Do not clean washable series immediately after soldering. The cleaning
agent may be absorbed into the switch through respiration while the switch
cools.
1
2
3
4
q 8,5
R 1,0
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Bulk
PN
Force
Color of Stem Life cycle
Scale - 2:1
430 476 043 716
430 466 043 726
430 456 043 736
160g ± 50gf
260g ± 70gf
360g ± 90gf
Black
White
Salmon
500.000
300.000
200.000
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
Projection
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Date
Name
disaster prevention, medical, public information network etc. where higher _f
safety and reliability are especially required or if there is possibility of
direct damage or injury to human body, Wurth Elektronik must be asked
e
for a written approval.
d
material change _14-08-19 AL Drawn 11-02-14
revised MatchCode 14-07-25 AL Checked ^11-02-14
Bounce 10ms max. 14-04-11 DaF
Jelisarow
Hsu
c
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability functions
b
or performance, the sufficient reliability evaluation-check for the safety
a
washable definition ^14-01-31 DaF
warning text 11-10-28 WJ
Material of Frame 11-04-12 WJ
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
must be performed before by the user before usage.
REV FILE
DATE BY EDV NO 4304x60439x6.dft
Basic material
DESCRIPTION
WS-TATV 12x12mm washable Tact Switch, THT version
Scale
2:1
Position
Drawing.- No. 4304x60437x6
System :Solid Edge V20
SIZE
A4