428527520908 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-ROTV 10x10 Rotary Switch, 08 position, THT version

9,60 ±0,1
O 1,00
8 C2
1 C4
5,08
RECOMMENDED LAYOUT
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Contact Rating:
Switching:
150mA, 24VDC
Non-Switching:
400mA, 24VDC
>Contact Resistance:
Initial:
80mOHM max.
After Life Test:
200mOHM max.
>Insulation Resistance: min. 100MOHM at 250VDC
>Dielectric Strength:
250VAC for 1 minute
>Operating Force:
700g max.
>Life cycle:
10.000 steps
>Position:
8
>Actuator:
Cross type
MATERIAL
>Cover: PA66 UL 94V-0, color light grey
>Base: PA66 UL 94V-0, color black
>Actuator: POM UL HB
>Contact: Gold Plated
>Terminal: Gold Plated
0,54
5,08
0,20
7,62
10,00
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
Projection
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability
functions or performance, the sufficient reliability evaluation-check for the
b revised MatchCode 14-07-25 AL
a Washable Definition 14-03-06 DaF
safety must be performed before by the user before usage.
REV FILE
DATE BY
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C for 10 sec. max
>Hand soldering at 350°C for 3 sec. max
WASHABLE DEFINITION
Please do not submerse washable products into water
or cleaning agents or put them in locations exposed to
water or liquids completely. When cleaning by hand
(brushing), please do not use excessive force on our
switch to avoid malfunction afterwards, because you
could deform function relevant areas or you could
damage sealing functions. Do not clean washable
series immediately after soldering. The cleaning agent
may be absorbed into the switch through respiration
while the switch cools.
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tube
Scale - 3:1
Part number Color of Actuator Position
Code
428 527 520 908
dark grey
08
Real Code
428 527 520 909
ivory
08 Complement Code
Real Code
C1 2 48
0
1
2

3
4

5

6

7
Complement Code
C1 2 48
0    
1
 
2

3

4

5


6

7

GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Basic material
Date
Drawn ^13-03-25
Checked 13-03-25
Name
Jelisarow
Hsu
DESCRIPTION
WS-ROTV 10x10 Rotary Switch, 08 position, THT version
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
Scale
3:1
Position
Drawing.- No. 42852752090x
System :Solid Edge ST4
SIZE
A4