428427320911 Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-ROTU 10x10mm right angle rotary Switch, 10 position, THT version

TECHNICAL CHARACTERISTICS
0,54
5,08
5,08
8C2
1C4
SPECIFICATION
>Contact Rating:
Switching:
150mA, 24VDC
Non-Switching:
400mA, 24VDC
>Contact Resistance:
Initial:
80mOHM max.
After Life Test:
200mOHM max.
>Insulation Resistance: min. 100MOHM at 250VDC
>Dielectric Strength:
250VAC for 1 minute
>Operating Force:
700g max.
>Life cycle:
10.000 steps
>Position:
10
>Actuator:
Arrow type
10,0
RECOMMENDED LAYOUT
MATERIAL
>Cover: PA66 UL 94V-0, color light grey
>Base: PA66 UL 94V-0, color black
>Actuator: POM UL HB
>Contact: Gold Plated
>Terminal: Gold Plated
O 9,6 ±0,1
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is possibility
of direct damage or injury to human body, Wurth Elektronik must be
asked for a written approval.
In addition, even electronic component in general electronic equipments,
when used in electrical circuits that require high safety, reliability
functions or performance, the sufficient reliability evaluation-check for the
safety must be performed before by the user before usage.
Projection
b revised MatchCode14-07-25 ^AL
a Washable Definition 14-05-03 DaF
REV FILE
DATE BY
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering at 260°C for 10 sec. max
>Hand soldering at 350°C for 3 sec. max
WASHABLE DEFINITION
Please do not submerse washable products into water
or cleaning agents or put them in locations exposed to
water or liquids completely.When cleaning by hand
(brushing), please do not use excessive force on our
switch to avoid malfunction afterwards, because you
could deformfunction relevant areas or you could
damage sealing functions.Do not clean washable series
immediately after soldering. The cleaning agent may
be absorbed into the switch through respiration while
the switch cools.
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: ROHS, Reach
Scale - 2:1
PACKAGING INFORMATION
>Tube
Part number Color of Actuator Position
Code
428 427 320 910
dark grey
10
Real Code
428 427 320 911
ivory
10 Complement Code
Real Code
C1 248
0
0
1 
1
2 
2
3 
3
4
4
5  5
6  6
7 7
8
8
9 
9
Complement Code
C1 248
0 0
1  1
2  2
3
3
4  4
5   5
6 
6
7
7
8 8
9  9
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Basic material
Date
Drawn 12-03-13
Checked 12-03-13
Name
Jelisarow
Hsu
DESCRIPTION
WS-ROTU 10x10mm right angle rotary Switch, 10 position,
THT version
WE _{Würth Elektronik}
eiCan
CAD ^eiCan
EDV NO 42842732091x.dft
Scale
2:1
Position
SIZE
Drawing.- No. 42842732091x
A4
System :Solid Edge V20