4183171709XX Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-DITU, Piano type THT version, flat Actuator without top tape sealed

TECHNICAL CHARACTERISTICS
O 0.8
2.54 ±0.03
SPECIFICATION
>Contact Rating:
Switching:
25mA, 24VDC
Non-Switching:
100mA, 50VDC
>Contact Resistance:
Initial:
50mOHM max.
After Life Test:
100mOHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
500VAC for 1 minute
>Operating Force:
1000g max.
>Mechanical Life:
min. 5000 cycles
>Electrical Life:
2000 cycles / 25mA, 24VDC
>Flat Actuator Type
A u0.2
9.4 ±0.2
0.32 ±0.05
2.54 ±0.03
0.6 ±0.03
1.2 ±0.03
7.62 ±0.3
Wiring Diagram
MATERIAL
>Cover: PPS UL 94V-0, color Black
>Base: HTN UL 94V-0, color Black
>Actuator: PA 46 UL 94V-0, color White
>Contact: Gold Plated
>Terminal: Tin Plated
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10 sec. max
>Hand soldering with 30W or under at 350°C for 3 sec. max
or at 270°C for 5 sec. max
>Keep in "off" position during soldering
>Ultrasonic cleaning not re-commended
>Any inflow of Flux into the switch may influence the contact function
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
1.44 ±0.03
PACKAGING INFORMATION
>Tube packaging only
>On delivery in "off" position
DIMENSION
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Projection
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of
direct damage or injury to human body, Wurth Elektronik must be asked
for a written approval.
In addition, even electronic component in general electronic equipments, _{b Revised MatchCode14-07-24 AL}
when used in electrical circuits that require high safety, reliability functions
or performance, the sufficient reliability evaluation-check for the safety
a warning text 11-10-26 WJ
must be performed before by the user before usage.
REV FILE
DATE BY
Scale - 2:1
No.Of Pole 2
3
4
5
Dim. A (mm) 6.08 8.62 11.16 13.70
No.Of Pole 8
10
12
Dim. A (mm) 21.32 26.40 31.48
6
16.24
7
18.78
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Date
Drawn 09-02-24
Checked ^09-02-24
Name
Jelisarow
Hsu
Basic material
DESCRIPTION
WS-DITU, Piano type
THT version, flat Actuator without top tape sealed
WE _{Würth Elektronik}
RDX
CAD
RDX
Scale
2:1
Position
Drawing.- No. 4183171709xx
EDV NO
4183171709xx.dft
System :Solid Edge V20
SIZE
A4