4183111708XX Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-DISU, Piano type, SMD version, flat Actuator without top tape sealed

A u0.2
0.60 ±0.03 1.20 ±0.03
2.54 ±0.03
9.40 ±0.2 0.32 ±0.05
7.62 ±0.2
10.40 ±0.3
0.89 ±0.2
h 0,10 Ref.
2.54
1.10
Wiring Diagram
TECHNICAL CHARACTERISTICS
SPECIFICATION
>Contact Rating:
Switching:
25mA, 24VDC
Non-Switching:
100mA, 50VDC
>Contact Resistance:
Initial:
50mOHM max.
After Life Test:
100mOHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
500VAC for 1 minute
>Operating Force:
1000g max.
>Mechanical Life:
min. 5000 cycles
>Electrical Life:
2000 cycles / 25mA, 24VDC
>Flat Actuator Type
MATERIAL
>Cover: PPS UL 94V-0, color Black
>Base: HTN UL 94V-0, color Black
>Actuator: PA 46 UL 94V-0, color White
>Contact: Gold Plated
>Terminal: Tin Plated
SOLDERING INFORMATION
>Terminal in SMD version
>Reflow soldering according to JEDEC J-STD 020 Hot Air
>Keep in "off" position during soldering
>For cleaning or washing only with top tape sealed
>VPH Heating Process not recommended
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
PACKAGING INFORMATION
>Tape & Reel Packaging only
>On delivery in "off" position
1.44 ±0.03
DIMENSION
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where
higher safety and reliability are especially required or if there is
possibility of direct damage or injury to human body, Wurth Elektronik
must be asked for a written approval.
In addition, even electronic component in general electronic
equipments, when used in electrical circuits that require high safety,
reliability functions or performance, the sufficient reliability
evaluation-check for the safety must be performed before by the user
before usage.
Projection
No.Of Pole 2
3
4
5
Dim. A (mm) 6.08 8.62 11.16 13.70
Scale - 2:1
No.Of Pole
Dim. A (mm)
8
21.32
10
26.40
12
31.48
6
16.24
7
18.78
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Basic material
Date
Name ^DESCRIPTION
Drawn 09-03-23 Jelisarow ^{WS-DISU, Piano type,}
Checked ^{09-03-24 Hsu Mei-Ting} _{SMD version, flat Actuator without top tape sealed}
c Revised MatchCode14-07-10 AL
b housing-bar 13-03-13 WJ
a warning text 11-10-26 WJ
WE _{Würth Elektronik}
RDX
CAD
RDX
REV FILE
DATE BY EDV NO 4183111708xx.dft
Scale
2:1
Position
SIZE
Drawing.- No. 4183111708xx
A4
System :Solid Edge V20