4182171709XX Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-DITU, right angle, THT version flat Actuator without top tape sealed

TECHNICAL CHARACTERISTICS
2.54 ±0.05
O 0.80
SPECIFICATION
>Contact Rating:
Switching:
25mA, 24VDC
Non-Switching:
100mA, 50VDC
>Contact Resistance:
Initial:
50mOHM max.
After Life Test:
100mOHM max.
>Insulation Resistance: min. 100MOHM at 500VDC
>Dielectric Strength:
500VAC for 1 minute
>Operating Force:
1000g max.
>Mechanical Life:
min. 5000 cycles
>Electrical Life:
2000 cycles / 25mA, 24VDC
>Flat Actuator Type
MATERIAL
>Cover: PBT UL 94V-0, color Red
>Base: PA 66 UL 94V-0, color Black
>Actuator: PA 66 UL 94V-0, color White
>Support: PA 66 UL 94V-0, color Black
>Contact: Gold Plated
>Terminal: Tin Plated
A u0.2
0.13 ±0.05
Wiring Diagram
SOLDERING INFORMATION
>Terminal in THT version
>Wave soldering 260°C 10sec. max
>Hand soldering with 30W or under at 350°C for 3 sec. max or at
270°C for 5 sec max
>Keep in "off" position during soldering
>Ultrasonic cleaning not re-commended
>Any inflow of Flux into the switch may influence the contact function
ENVIRONMENTAL
>Storage condition: -40°C ~ +85°C
>Operation condition: -40°C ~ +85°C
>Compliance: Lead Free, ROHS, Reach
0.60 ±0.05
2.54 ±0.05
PACKAGING INFORMATION
>Tube packaging only
>On delivery in "off" position
DIMENSION
This electronic component is designed and developed with the intention
for use in general electronics equipments.
Before incorporating the components into any equipments in the field
such as aerospace, aviation, nuclear control, submarine, transportation,
(automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network etc. where higher
safety and reliability are especially required or if there is possibility of
direct damage or injury to human body, Wurth Elektronik must be asked
for a written approval.
Projection
In addition, even electronic component in general electronic equipments, _{b revised MatchCode} 14-07-23 AL
when used in electrical circuits that require high safety, reliability functions
or performance, the sufficient reliability evaluation-check for the safety
a
warning text
11-10-26 WJ
must be performed before by the user before usage.
REV FILE
DATE BY
Scale - 2:1
No.Of Pole
Dim. A (mm)
No.Of Pole
Dim. A (mm)
2
3
4
5
6
6.08 8.62 11.16 13.70 16.24
8
9
10
12
21.32 23.86 26.40 31.48
GENERAL TOLERANCE
.x = +/- 0,2
.xx = +/- 0,15
Basic material
Date
Drawn 09-02-24
Checked 09-02-24
Name
Jelisarow
Hsu
DESCRIPTION
WS-DITU, right angle, THT version
flat Actuator without top tape sealed
7
18.78
WE _{Würth Elektronik}
RDX
CAD
RDX
EDV NO 4182171709xx.dft
Scale
2:1
Position
Drawing.- No. 4182171709xx
System :Solid Edge V20
SIZE
A4