4181271609XX Datasheet, PDF (1/1 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WS-DITV THT version flat actuator with top tape sealed

SPECIFICATION
2,54
A
P.C.B Layout
2,54
O 0,8
Wiring Diagram
>Contact Rating
Switching :
25mA, 24VDC
Non-Switching :
100mA, 50VDC
>Contact Resistance
Initial:
50mΩ max.
After life test :
100mΩ max.
>Insulation Resistance :
min. 100MΩ at 500VDC
>Dielectric Strength :
500VAC for 1 minute
>Operation Force :
600g max.
>Mechanical Life :
2000 cycles
>Electrical Life :
2000 cycles / 25mA, 24VDC
>Flat Actuator with top tape sealed
MATERIAL
>Cover :
>Base :
>Actuator :
>Tape :
>Contact :
>Terminal :
PA9T UL 94 V-0, color Black
PA9T UL 94 V-0, color Black
PA66 UL 94 V-0, color White
Polyimide Film
Gold Plated
Gold Plated
SOLDERING INFORMATION
0,5 x 0,25
7,62 ±0,5
>Terminal in THT version
>Wave soldering 260°C 10sec. max
>Hand soldering with 30W or under at 350°C for 3 sec. max
>Keep in “off” position during soldering
>Ultrasonic cleaning only with top tape sealed
>Any inflow of Flux into the switch may influence the contact function
ENVIRONMENTAL
Storage condition :
Operation condition :
Compliance :
-40°C ~ +85°C
-40°C ~ +85°C
Lead Free , ROHS , Reach
PACKAGING INFORMATION
>Tube
>On delivery in “off” position
Scale - 2:1
DIMENSION
No. of Poles
Dim. A (mm)
No. of Poles
Dim. A (mm)
1
3.48
7
18.72
2
3
4
5
6.02 8.56 11.10 13.64
8
9
10
21.26
23.80
26.34
6
16.18
12
31.42
Würth Elektronik eiSos GmbH & Co. KG
EMC & Inductive Solutions
Max-Eyth-Str. 1
74638 Waldenburg
Germany
com. [phone] - 0
CREATED
DaF
CHECKED
JLi
GENERAL TOLERANCE
DIN ISO 2768-1m
PROJECTION
METHOD
DESCRIPTION
WS-DITV
THT version
flat actuator with top tape sealed
TECHNICAL REFERENCE
_________
ORDER CODE
418 127 160 9xx
SCALE
2:1
REV.
FILE
DATE
www.we-online.de
BY ^[e-mail]
SIZE
IC type
STATUS
Released
DATE
2015-05-19
BUSINESS UNIT
Switch
PAGE
1 /1
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.