158353040 Datasheet, PDF (1/9 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WL-SWTC SMD White Top View Ceramic LED

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test condi-
tions
Value Unit
Power dissipation
PDiss 2.52
W
duty/10
Peak Forward Current
@1kHz IF _Peak 1000 mA
Continuous Forward Current
IF
700 mA
Reverse Voltage
VRev
5
V
ESD Threshold/ Human Body Modell
Absolute thermal resistance junction to solder
VESD 8000
V
point
R_θJS
8
K/ W
Junction temperature
Tj
150
°C
E General information:
•Operating temperature: -40°C to +125°C
•Storage temperature (on tape & reel): -40°C to +125°C; 60% RH max.
•Moisture Sensitivity Level (MSL): 2
Optical Properties:
Properties
Chip Technology
Emitting Color
Lens Type
Value
InGaN
Moonlight
Dome Lens Waterclear
1.5
2015-06-24
SSt
ZAn
1.4
2015-03-23
SSt
HOe
Würth Elektronik eiSos GmbH & Co. KG
1.3
2014-12-01
SSt
ZAn
EMC & Inductive Solutions
Max-Eyth-Str. 1
1.2
2014-11-10
SSt
ZAn
74638 Waldenburg
1.1
2014-07-18
SSt
Germany
HOe
Tel. [phone] - 0
1.0
2014-01-30
SSt
PLD
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
DESCRIPTION
WL-SWTC SMD White Top View Ceramic
LED
Order.- No.
SIZE
158353040
A4
Size: 3535
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.