158301260 Datasheet, PDF (1/9 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WL-SWTP SMD White Top View PLCC LED

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test condi-
tions
Value Unit
Power dissipation
PDiss 105 mW
duty/10
Peak Forward Current
@1kHz IF _Peak 40
mA
Continuous Forward Current
IF
30 mA
Reverse Voltage
VRev
5
V
ESD Threshold/ Human Body Modell
Absolute thermal resistance junction to solder
VESD 2000
V
point
R_θJS 38 K/ W
Junction temperature
Tj
130
°C
E General information:
•Operating temperature: -40°C to +85°C
•Storage temperature (on tape & reel): -40°C to +85°C; 60% RH max.
•Moisture Sensitivity Level (MSL): 3
Optical Properties:
Properties
Chip Technology
Emitting Color
Lens Type
Value
InGaN
Cool White
Top LED
Würth Elektronik eiSos GmbH & Co. KG
2.1
2015-03-23
SSt
HOe
EMC & Inductive Solutions
Max-Eyth-Str. 1
2.0
2014-11-10
SSt
ZAn
74638 Waldenburg
1.1
2014-06-03
SSt
Germany
PLD
Tel. [phone] - 0
1.0
2014-01-30
SSt
PLD
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
DESCRIPTION
WL-SWTP SMD White Top View PLCC LED
Order.- No.
SIZE
158301260
A4
Size: 3014
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.