155124VS73200 Datasheet, PDF (1/9 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WL-SMSW SMD chip LED side view mono-color waterclear

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test conditions
Value Unit
Power dissipation
PDiss
60
mW
Peak Forward Current
duty/10@1kHz IF _Peak
100
mA
Continuous Forward Current
IF
25
mA
Reverse Voltage
VRev
5
V
ESD Threshold/ Human Body Modell
VESD _HBM 2000
V
E General information:
•Operating temperature: -40°C to +85°C
•Storage temperature (on tape & reel): -40°C to +85°C; 60% RH max.
•Moisture Sensitivity Level (MSL): 3
Optical Properties:
Properties
Chip Technology
Emitting Color
Lens Type
Value
AlInGaP
Bright Green
Round
1.9
2015-03-23
SSt
HOe
1.8
2014-03-17
SSt
SSt
1.7
2013-12-09
SSt
HOe
Würth Elektronik eiSos GmbH & Co. KG
1.6
2013-10-08
SSt
HOe
EMC & Inductive Solutions
Max-Eyth-Str. 1
1.5
2013-09-23
SSt
HOe
74638 Waldenburg
1.4
2013-04-10
SSt
Germany
SSt
Tel. [phone] - 0
1.3
2013-04-11
SSt
SSt
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
DESCRIPTION
WL-SMSW SMD chip LED side view mono-
color waterclear
Order.- No.
SIZE
155124VS73200
A4
Size: 1204
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.