151053YS04500 Datasheet, PDF (1/9 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WL-TMRW THT LED round mono-color waterclear

A Dimensions: [mm]
B Recommended hole pattern: [mm]
C Schematic:
D Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test conditions
Value Unit
Power dissipation
PDiss
78
mW
Peak Forward Current
duty/10@1kHz IF _Peak
100
mA
Continuous Forward Current
IF
30
mA
Reverse Voltage
VRev
5
V
ESD Threshold/ Human Body Modell
VESD _HBM 2000
V
E General information:
•Operating temperature: -40°C to +85°C
•Storage temperature (on tape & reel): -40°C to +85°C; 60% RH max.
•Moisture Sensitivity Level (MSL): 1
Optical Properties:
Properties
Chip Technology
Emitting Color
Lens Type
Value
AlInGaP
Yellow
Waterclear
1.9
2015-03-23
SSt
HOe
1.8
2014-11-03
SSt
ZAn
1.7
2014-03-17
SSt
SSt
Würth Elektronik eiSos GmbH & Co. KG
1.6
2013-09-12
SSt
PLD
EMC & Inductive Solutions
Max-Eyth-Str. 1
1.5
2013-11-05
SSt
PLD
74638 Waldenburg
1.4
2013-10-08
SSt
Germany
PLD
Tel. [phone] - 0
1.3
2013-09-10
SSt
SSt
www.we-online.com
[e-mail]
REV
DATE
BY
CHECKED
DESCRIPTION
WL-TMRW THT LED round mono-color
waterclear
Order.- No.
SIZE
151053YS04500
A4
Size: 5 mm
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.