150141YB73100 Datasheet, PDF (1/9 Pages) Wurth Elektronik GmbH & Co. KG, Germany. – WL-SBTW SMD TOP LED bi-color waterclear

A Dimensions: [mm]
B Recommended land pattern: [mm]
C Schematic:
D Absolute Maximum Ratings (Ambient Temperature 25°C):
Properties
Test conditions
Value Unit
Power Dissipation (Yellow)
PDiss _Y
72
mW
Power Dissipation (Blue)
PDiss _B
105
mW
Peak Forward Current
duty/10@1kHz IF _Peak
100
mA
Continuous Forward Current
IF
30
mA
Reverse Voltage
VRev
5
V
ESD Threshold/ Human Body Modell
VESD _HBM 1000
V
E General information:
•Operating temperature: -40°C to +85°C
•Storage temperature (sealed bag): -40°C to +85°C; 60% RH max.
•Moisture Sensitivity Level (MSL): 3
Optical Properties:
Properties
Chip Technology
Emitting Color
Lens Type
Value
AlInGaP + InGaN
Yellow & Blue
Top LED
DESCRIPTION
2.8
2015-03-23
SSt
HOe
2.7
2014-03-17
SSt
SSt
WL-SBTW SMD TOP LED bi-color
2.6
2013-12-09
SSt
2.5
2013-10-08
SSt
HOe
Würth Elektronik eiSos GmbH & Co. KG
HOe
EMC & Inductive Solutions
Max-Eyth-Str. 1
waterclear
2.4
2013-09-10
SSt
SSt
74638 Waldenburg
Germany
Order.- No.
SIZE
2.3
2013-05-14
SSt
2.2
2013-04-10
SSt
HOe
Tel. [phone] - 0
SSt
www.we-online.com
150141YB73100
A4
[e-mail]
REV
DATE
BY
CHECKED
Size: 3528
This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use.
Moreover Würth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Würth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before
the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.