PF2500_14 Datasheet, PDF (1/2 Pages) Won-Top Electronics – 25A 1/2” PRESS-FIT DIODE

®
WON-TOP ELECTRONICS
Features
 Diffused Junction
 Low Leakage
 Low Cost
 High Surge Current Capability
 Typical IR less than 5.0µA
PF2500 – PF2506
25A 1/2” PRESS-FIT DIODE
Pb
A
Anode +
Mechanical Data
 Case: DO-21, Copper Case and Components
Hermetically Sealed
 Terminals: Contact Areas Readily Solderable
 Polarity: Cathode to Case (Reverse Units Are F
Available Upon Request and Are Designated
By A “R” Suffix, i.e. PF2502R or PF2504R)
 Polarity: Red Color Equals Standard,
Black Color Equals Reverse Polarity
E
 Mounting Position: Any
 Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 2
C
D
B
DO-21
Dim
Min
Max
A
15.77 15.97
B
12.73 12.82
C
1.25 1.31
D
9.55 9.85
E
5.70 5.90
F
28.00
—
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current @T_C = 150°C
Non-Repetitive Peak Forward Surge Current
8.3ms Single Half Sine-Wave Superimposed on
Rated Load (JEDEC Method)
Forward Voltage
Peak Reverse Current
At Rated DC Blocking Voltage
@I_F = 25A
@T_A = 25°C
@T_A = 100°C
Typical Junction Capacitance (Note 1)
Typical Thermal Resistance (Note 2)
Operating and Storage Temperature Range
Symbol PF2500 PF2501 PF2502 PF2503 PF2504 PF2505 PF2506 Unit
VRRM
VRWM
VR
50
100 200 300 400 500 600
V
VR(RMS)
35
70
140 210 280 350 420
V
IO
25
A
IFSM
VFM
IRM
CJ
RǀJC
TJ, TSTG
300
1.0
5.0
500
300
1.2
-65 to +175
A
V
µA
pF
°C/W
°C
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal Resistance: Junction to case, single side cooled.
© Won-Top Electronics Co., Ltd.
Revision: April, 2012
www.wontop.com
1