PB1000G Datasheet, PDF (1/3 Pages) Won-Top Electronics – 10A GLASS PASSIVATED BRIDGE RECTIFIER

W TE
POWER SEMICONDUCTORS
PB1000G – PB1010G
10A GLASS PASSIVATED BRIDGE RECTIFIER
Features
! Glass Passivated Die Construction
! High Current Capability
! High Case Dielectric Strength
! High Surge Current Capability
! Ideal for Printed Circuit Board Application
! Plastic Material has Underwriters Laboratory
Flammability Classification 94V-O
Mechanical Data
! Case: Molded Plastic
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208
! Polarity: Marked on Body
! Weight: 5.4 grams (approx.)
! Mounting Position: Through Hole for #6 Screw
! Mounting Torque: 5.0 Inch-pounds Maximum
! Marking: Type Number
H
J
G +~
KBPC-8
Dim Min
Max
E
A
A
18.54 19.56
~-
B
6.35
7.60
C
19.00
—
E
D
1.27 Ø Typical
E
5.33
7.37
Hole for #6 screw
D
C
G
3.60
4.00
H
12.20 13.20
J 2.38 x 45°C Typical
B
All Dimensions in mm
A
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
Average Rectified Output Current (Note 1) @T_A = 45°C
Non-Repetitive Peak Forward Surge Current 8.3ms
Single half sine-wave superimposed on rated load
(JEDEC Method)
Forward Voltage (per element)
@I_F = 5.0A
Peak Reverse Current
At Rated DC Blocking Voltage
@T_C = 25°C
@T_C = 125°C
I²t Rating for Fusing (t<8.3ms) (Note 2)
Typical Junction Capacitance (Note 3)
Typical Thermal Resistance (Note 4)
Operating and Storage Temperature Range
Symbol
PB PB PB PB PB PB PB
1000G 1001G 1002G 1004G 1006G 1008G 1010G
VRRM
VRWM
VR
50 100 200 400 600 800 1000
VR(RMS)
35
70 140 280 420 560 700
Unit
V
V
IO
10
A
IFSM
180
A
VFM
1.0
V
IR
5.0
500
µA
I²t
160
A²s
Cj
220
pF
R
JC
4.30
K/W
Tj, TSTG
-55 to +150
°C
Note: 1. Mounted on 6.0" x 2.2" x 2.2" Al. plate.
2. Non-repetitive, for t > 1ms and < 8.3ms.
3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
4. Thermal resistance junction to case per element.
PB1000G – PB1010G
1 of 3
© 2002 Won-Top Electronics