P6SMBJ Datasheet, PDF (1/5 Pages) Pan Jit International Inc. – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 5.0 to 220 Volts 600 Watt Peak Power Pulse)

W TE
POWER SEMICONDUCTORS
P6SMBJ SERIES
600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSORS
Features
! Glass Passivated Die Construction
! 600W Peak Pulse Power Dissipation
B
! 5.0V – 170V Standoff Voltage
! Uni- and Bi-Directional Versions Available
! Excellent Clamping Capability
A
! Fast Response Time
! Plastic Case Material has UL Flammability
Classification Rating 94V-O
C
D
F
HG
E
Mechanical Data
! Case: JEDEC DO-214AA Low Profile Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking:
Unidirectional – Device Code and Cathode Band
Bidirectional – Device Code Only
! Weight: 0.093 grams (approx.)
SMB/DO-214AA
Dim
Min
Max
A
3.30
3.94
B
4.06
4.70
C
1.91
2.11
D
0.152
0.305
E
5.08
5.59
F
2.13
2.44
G
0.051
0.203
H
0.76
1.27
All Dimensions in mm
“C” Suffix Designates Bi-directional Devices
“A” Suffix Designates 5% Tolerance Devices
No Suffix Designates 10% Tolerance Devices
Maximum Ratings and Electrical Characteristics @T_A=25°C unless otherwise specified
Characteristic
Symbol
Value
Unit
Peak Pulse Power Dissipation 10/1000µS Waveform (Note 1, 2) Figure 3
PPPM
600 Minimum
W
Peak Pulse Current on 10/1000µS Waveform (Note 1) Figure 4
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) (Note 2, 3)
Operating and Storage Temperature Range
IPPM
See Table 1
A
IFSM
100
A
Tj, TSTG
-55 to +150
°C
Note: 1. Non-repetitive current pulse, per Figure 4 and derated above T_A = 25°C per Figure 1.
2. Mounted on 5.0mm² (0.013mm thick) land areas.
3. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
P6SMBJ SERIES
1 of 5
© 2002 Won-Top Electronics