WPANTDP091-R1A Datasheet, PDF (1/3 Pages) World Produts Inc. – GPS L1 Band Active Module

GPS L1 Band Active Module
WPANTDP091-R1A
Description / Application
This ruggedized antenna contains Active GPS Module for L1 Band function. This can be used in portable navigation and tracking
applications where high performance is required. The module consists of a circularly polarized patch antenna and a Low Noise
Amplifier (LNA). It comes with a 3 feet long RG-174 cable with a right angle Type-N male (with hex nut) at the end.
We can assist your engineers to optimize mounting positions for these antennas in your applications and can further customize the
antennas for your specific needs. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency 1567 – 1583 MHz
Approximate Antenna Impedance []
VSWR – Typical
LNA Gain [dBi] (Typical)
Active Antenna Peak Gain [dBi]
Voltage [V] (Typical)
Current [mA] (Typical)
Noise Figure [dB] (Typical)
Polarization
Axial Ratio [dB] (Typical)
Accepted Power [W] (Max)
50Ω
< 2:1
27 dBi
27 dBi @ Zenith
3.0 – 5.0 V
6 mA
1.5 dB
RHCP
3 dB
2 Watts
Mechanical / Environmental Properties
Antenna Dimensions (L x W x H)
Antenna Color
Material
Bracket Vertical Strength
Cable
Connector
Operating / Storage Temperature
Environmental
UV Protection
Hazardous Materials
2.04’’ x 2.31’’ x 0.59’’ (51.82mm x 58.67mm x 15mm)
Black
ABS Plastic
5 kgf
3 feet long RG-174
Right Angle Type-N Male with hex nut
-40^oC to +90^oC
Meets standards for UL 94V-0
This antenna is built in accordance with: IP 67
Cycle Light
Light Strength Explore Cycle
1
UVA-340
0.89 W / m^2
@340 nm
8h Light
4h high tem dark
RoHS Compliant
Temperature
60 ± 3 °C
50 ± 3 °C
Rev: 3.0
Created on: July 10, 2013
Created by: TT
Approved by: BP
Page | 1