WPANT40012-CA Datasheet, PDF (1/2 Pages) World Produts Inc. – 915 / 2400 MHz ISM Dual-band Wrap-Around AMI Antenna

WPANT40012-CA
915 / 2400 MHz ISM Dual-band Wrap-Around AMI Antenna
Description / Application
This is a high performance wrap-around antenna for Electric Meters that operates in both 900 MHz and 2.4 GHz ISM Bands. It has
an industrial grade double stick tape on the back for easy installation. Standard cable is 1.32mm dia Micro Co-ax U.FL cable with
IPX / Hirose connector.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical*
Peak Gain [dBi] (Typical)*
Efficiency [%] (Typical)*
Polarization
Pattern
902 – 928 MHz
50Ω
< 2.5:1
1 to 3 dBi
40 – 60 %
Linear
Near Omni-directional
2.4 – 2.5 GHz
50Ω
< 2.5:1
2 to 3.5 dBi
40 – 65 %
Linear
Near Omni-directional
*Note: The above mentioned relevant performance metrics are recorded with the Antenna placed inside L&G & GE Electric meters. Any modifications
with regards to the application/use of this antenna (as defined in this specification) may change antenna performance characteristics. Performance
will also vary based on the placement positions of the antenna in the meter. Please contact WPI design team for optimization & placement selection
on any meter.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Tape on the Back
Operating / Storage Temperature
UV Tolerance
Environmental
Hazardous Materials
* Thickness is 0.88mm including the tape on back
6.7’’ X 1’’ X 10mils**
Blue
(170mm X 25mm X 0.25mm)
8.5’’ long (from the edge of the PCB) 1.32mm dia Micro Co-ax U.FL
IPX / Hirose equivalent
6mm wide 4930 3M Double Stick
-40^oC to +90^oC
100% UV Resistant
Meets standards for UL 94V-0
RoHS Compliant
Rev: 2.0
Created on: August 8, 2013
Created by: MKS
Approved by: BP
Page | 1