WPANT40009-CB Datasheet, PDF (1/3 Pages) World Produts Inc. – 850/1900 MHz Dual-band Cellular Wrap-Around AMI Antenna

WPANT40009-CB
850/1900 MHz Dual-band Cellular Wrap-Around AMI Antenna
Description / Application
This is a high performance wrap-around antenna for Electric Meters that operates in both 824-894 MHz and 1850-1990 MHz Cellular
Bands. This Antenna helped Systems pass PTCRB Certifications. Standard cable is U.FL 1.13mm micro-coax & connector is IPX/
Hirose equivalent. The Antenna is backed by a 3M double stick industry grade foam tape.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical*
Peak Gain [dBi] (Typical)*
Efficiency [%] (Typical)*
Polarization
Pattern
824 – 894 MHz
50Ω
< 2.5:1
3 to 3.7 dBi
40 – 60 %
Linear
Near Omni-directional
1850 – 1990 MHz
50Ω
< 2.5:1
3 to 3.5 dBi
40 – 65 %
Linear
Near Omni-directional
*Note: The above mentioned relevant performance metrics are recorded with the Antenna wrapped around (installed) the meter’s surface, inside the
upper plastic cap/drum. Any modifications with regards to the application/use of this antenna (as defined in this specification) may change antenna
performance characteristics. Since this is an embedded Antenna, Performance will vary based on the Antenna placement within the meter & also
with the variance of the Cable routing.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Operating / Storage Temperature
UV Tolerance
Environmental
Hazardous Materials
6.7’’ X 1’’ X 10mils
White
(170mm X 25mm X 0.25mm)
10.6’’ long (from the edge of the PCB) 1.13mm dia Micro Co-ax U.FL
IPX / Hirose equivalent
-40^oC to +90^oC
100% UV Resistant
Meets standards for UL 94V-0
RoHS Compliant
Rev: 2.0
Created on: August 8, 2013
Created by: MKS
Approved by: BP
Page | 1