WPANT40006-CB Datasheet, PDF (1/5 Pages) World Produts Inc. – 450 MHz Wrap-Around AMI Antenna

WPANT40006-CB
450 MHz Wrap-Around AMI Antenna
Description / Application
This is a wrap-around antenna for Electric Meters that operates from 450 – 470 MHz. This Antenna can work efficiently on any
typical Electric Meter. Standard cable on this antenna is 1.32mm dia Micro Coax and connector is IPX / Hirose equivalent. The
Antenna is backed by a 3M double stick industry grade foam tape.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical*
450 – 470 MHz
50Ω
< 2:1
Peak Gain [dBi] (Typical)* -2 to -1.5 dBi
Efficiency [%] (Typical)* 30 – 40 %
Polarization Linear
Pattern Near Omni-directional
*Note: The above mentioned relevant performance metrics are recorded with the Antenna placed on a particular L&G meter. Any modifications with
regards to the application/use of this antenna (as defined in this specification) may change antenna performance characteristics. Performance will
also vary based on the placement positions of the Antenna in the meter.
Mechanical / Environmental Properties
Antenna Dimensions**
Antenna Color
Cable
Connector
Operating / Storage Temperature
UV Tolerance
Environmental
Hazardous Materials
** Thickness with 3M double stick tape: 1.8mm
8.2’’ X 2’’ X 10mils
White
(208mm X 50mm X 0.25mm)
4’’ long (from the edge of the PCB) 1.32mm dia Micro Co-ax
IPX / Hirose equivalent
-40^oC to +90^oC
100% UV Resistant
Meets standards for UL 94V-0
RoHS Compliant
Rev: 2.0
Created on: August 8, 2013
Created by: MKS
Approved by: BP
Page | 1