WPANT40005-SA Datasheet, PDF (1/5 Pages) World Produts Inc. – 450 MHz Wrap-Around AMI Antenna

WPANT40005-SA
450 MHz Wrap-Around AMI Antenna
Description / Application
This is a wrap-around antenna for Electric Meters that operates from 450 – 470 MHz. This Antenna can work efficiently on any
typical Electric Meter. Standard cable on this antenna is 1.32mm Dia Micro Coax and connector is IPX / Hirose equivalent.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance []
VSWR – Typical*
Peak Gain [dBi] (Typical)*
Efficiency [%] (Typical)*
Polarization
Pattern
450 – 470 MHz
50Ω
< 2:1
-2 to -1.5 dBi
30 – 40 %
Linear
Near Omni-directional
*Note: The above mentioned relevant performance metrics are recorded with the Antenna placed on a particular L&G meter. Any modifications with
regards to the application/use of this antenna (as defined in this specification) may change antenna performance characteristics. Performance will
also vary based on the placement positions of the Antenna in the meter.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Operating / Storage Temperature
UV Tolerance
Environmental
Hazardous Materials
7.5’’ X 1.3’’ X 10mils (191mm X 34mm X 0.25mm)
White
7.2’’ long (from the edge of the PCB) 1.32mm dia Micro Co-ax
IPX / Hirose equivalent
-40^oC to +90^oC
100% UV Resistant
Meets standards for UL 94V-0
RoHS Compliant
Rev: 2.0
Created on: July 30, 2013
Created by: MKS
Approved by: BP
Page | 1