English
Language : 

WPANT40001-SC1 Datasheet, PDF (1/4 Pages) World Produts Inc. – 850/1900 MHz Dual-band Cellular Wrap-Around AMI Antenna
WPANT40001-SC1
850/1900 MHz Dual-band Cellular Wrap-Around AMI Antenna
Description / Application
This is a standard WPI antenna, designed for Metering applications that operate in US Cellular band. The antenna is designed such
a way that it performs optimum when it is wrapped around a meter’s surface, as shown in the pictures in the following pages. It is
designed to operate with healthy efficiency figures in both 824-894 MHz & 1850-1990 MHz bands, in spite of the heavy interference
(Noise/ RF blockage) inside of a typical meter. The antenna, if installed right, can provide best Signal / Noise figure for the overall RF
system. This particular configuration of the antenna comes with a 200mm 1.13mm dia micro co-ax cable and an IPX / Hirose
equivalent connector.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact sales@worldproducts.com with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance []
VSWR – Typical*
Peak Gain [dBi] (Typical)*
Efficiency [%] (Typical)*
Polarization
Pattern
824 – 960 MHz
50Ω
< 2.5:1
1.5 to 2.5 dBi
~ 65 %
Linear
Near Omni-directional
1850 – 1990 MHz
50Ω
< 2.5:1
2.5 to 3.5 dBi
~ 60 %
Linear
Near Omni-directional
*Note: The above mentioned relevant performance metrics are recorded with the Antenna wrapped around (installed) the meter’s surface, inside the
upper plastic cap/drum.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Tape
Operating / Storage Temperature
UV Tolerance
Environmental
Hazardous Materials
6.7’’ X 1.2’’ X 10mils (170mm X 29.5mm X 0.25mm)
Black
7.9’’ long (from the edge of the PCB) 1.13mm dia Micro Co-ax U.FL
IPX / Hirose equivalent
0.64mm thick Standard 3M double stick
-40oC to +90oC
100% UV Resistant
Meets standards for UL 94V-0
RoHS Compliant
Rev: 3.0
Created on: July 30, 2013
Created by: MKS
Approved by: BP
Page | 1