WPANT30102-S1B Datasheet, PDF (1/3 Pages) World Produts Inc. – 2.45 GHz Wi-Fi MIMO Body-mount Antenna

WPANT30102-S1B
2.45 GHz Wi-Fi MIMO Body-mount Antenna
Note: Prototypes shown. The actual antenna will be grey in color.
Description / Application
This is a Wi-Fi / WLAN MIMO Body mount antenna. It is surface independent, which means it performs efficiently on metallic as well
as non-metallic surfaces. The recommended minimum spacing between the two elements is 70mm. Standard cable is 24’’ long
1.32mm OD micro coax and connector is RP - SMA Male.
Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical
Peak Gain [dBi] (Typical)
Efficiency [%] (Typical)
Isolation [dB] (Typical)
Polarization
Pattern
2.4 – 2.5 GHz
50Ω
< 2:1
2 to 3 dBi
60 – 70 %
< -30 dB
Linear
Near Omni-directional
Mechanical / Environmental Properties
Antenna Dimensions 1.5’’ Height** X 1.3’’ Base Dia (38mm X 32.3mm)
Antenna Color Grey
Cable 24’’ long 1.32mm OD Micro Co-ax
Connector Reverse Polarity Straight SMA Male
Tape Standard 3M 4920 double stick
External Bottom Gasket Material Standard 3M 6208 foam
Nut Standard Nylon M12
Torque for the Nut 1.2
Antenna Plastic Radome ABS + Polycarbonate
Operating / Storage Temperature -40^oC to +90^oC
Environmental
(for the complete antenna assembly,
including the external foam gasket)
Salt Spray Resistant, Water Ingress Resistant, UV Resistant, Ageing
Resistant, Meets standards for UL 94V-0
This antenna is built in accordance with:
IP 67,66,65
NEMA 250-2008
ASTM G 85-2009
ASTM G 154-2006
Hazardous Materials RoHS Compliant
**Height includes the 3M tape & foam gasket thickness.
Rev: 1.0
Created on: February 18, 2014
Created by: MKS
Approved by: BP
Page | 1