WPANT30086-S3A Datasheet, PDF (1/3 Pages) World Produts Inc. – 2.45 GHz Wi-Fi Body-mount Antenna

WPANT30086-S3A
2.45 GHz Wi-Fi Body-mount Antenna
Description / Application
This is a 2.45 GHz Wi-Fi / WLAN Body mount antenna. It is surface independent, which means it performs efficiently on metallic as
well as non-metallic surfaces. Standard cable is 18’’ long 1.32mm OD micro coax and connector is SMA Male.
Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical
Peak Gain [dBi] (Typical)
Efficiency [%] (Typical)
Polarization
Pattern
Accepted Power [W] (Max)
2.4 – 2.5 GHz
50Ω
< 2:1
~ 2 dBi
60 – 70 %
Linear
Near Omni-directional
2 Watts
Mechanical / Environmental Properties
Antenna Dimensions 1.5’’ Height** X 1.3’’ Base Dia (38mm X 32.3mm)
Antenna Color Black
Cable 18’’ long 1.32mm OD Micro Co-ax
Connector Straight SMA Male
Tape Standard 3M 4920 double stick
External Bottom Gasket Material Standard 3M 6208 foam
Nut Standard Nylon M12
Torque for the Nut 1.2
Antenna Plastic Radome ABS + Polycarbonate
Operating / Storage Temperature -40^oC to +90^oC
Environmental
(for the complete antenna assembly,
including the external foam gasket)
Salt Spray Resistant, Water Ingress Resistant, UV Resistant, Ageing
Resistant, Meets standards for UL 94V-0
This antenna is built in accordance with:
IP 67,66,65
NEMA 250-2008
ASTM G 85-2009
ASTM G 154-2006
Hazardous Materials RoHS Compliant
**Height includes the 3M tape & foam gasket thickness.
Rev: 3.0
Created on: January 03, 2014
Created by: MKS
Approved by: BP
Page | 1