WPANT30074-S1A Datasheet, PDF (1/5 Pages) World Produts Inc. – 4G Cellular & ISM band Omni Antenna

WPANT30074-S1A
4G Cellular & ISM band Omni Antenna
Description / Application
This is a Surface Independent, High Performance 4G Cellular & ISM band Antenna, which is very compact in shape. The Antenna
can be configured with different Connector styles. This configuration has 1 meter RG58 Cable with straight SMA Male Connector.
The antenna is at DC ground to ensure protection against lightning.
The Antenna can be mounted to any surface, metal, concrete or wood and it will have the same characteristics, without any
change in the antenna tuning. This antenna does not need extra ground plane.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical
Peak Gain [dBi] (Typical)
Efficiency [%] (Typical)
Polarization
Pattern
Accepted Power [W] (Max)
Lightning Protection
698 – 960 MHz
50Ω
1392 – 1435 MHz
50Ω
1710 – 2700 MHz
50Ω
< 3:1
< 2.5:1
< 2.5:1
1 to 3 dBi
2 dBi
2 to 5.5 dBi
70 – 90 %
75 %
70 – 85 %
Linear
Near Omni-directional; Also depends on installation
2 Watts
DC ground
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Antenna Radome
Operating / Storage Temperature
Environmental
Hazardous Materials
5.3’’ Base Dia X 3.94’’ Height (134mm X 100mm)
White
1 meter long RG-58
Straight SMA male
ABS + Polycarbonate
-40^oC to +90^oC
Salt Spray Resistant, Water Ingress Resistant, UV Resistant, Ageing
Resistant, Meets standards for UL 94V-0
RoHS Compliant
Rev: 2.0
Created on: June 24, 2013
Created by: MKS
Approved by: BP
Page | 1