WPANT30001-SB Datasheet, PDF (1/4 Pages) World Produts Inc. – 3G Penta-band Monopole Antenna

3G Penta-band Monopole Antenna
WPANT30001-SB
Description / Application
This Penta-band monopole antenna is an ideal solution for wireless modems and devices operating in the cellular frequency bands.
This antenna is more of plug and play (off the shelf solution) and so Client’s don’t have to be concerned about tuning the Antenna or
investing lot of time and money in to R&D. The actual antenna performance in an application is dependent on the device ground
plane configuration (any circuit board in a typical wireless device will provide a sufficient match for this Antenna). This particular
antenna has successfully met the TIS, TRP & FCC requirements on a number of wireless modems in the past. It comes with an RA-
SMA connector.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further
customize the antennas for your specific needs. Please contact [e-mail] with your specific application
requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical
Peak Gain [dBi] (Typical)
Efficiency [%] (Typical)
Polarization
Pattern
824 – 960 MHz
50Ω
< 2.5:1
0.5 dBi
~ 55 %
Linear
Omni-directional
1710 – 2170 MHz
50Ω
< 2.5:1
2.5 dBi
70 %
Linear
Omni-directional
Mechanical / Environmental Properties
Antenna Height
Antenna Color
Connector
Antenna Radome
Operating / Storage Temperature
Environmental
Hazardous Materials
2’’ (50.5 mm)
Black
Right Angle SMA Male, Brass coating
ABS (Black)
-40^oC to +90^oC
Meets standards for UL 94V-0
RoHS Compliant
Rev: 3.0
Created on: February 24, 2014
Created by: MKS
Approved by: BP
Page | 1