WPANT10048-S1C Datasheet, PDF (1/2 Pages) World Produts Inc. – 2.4 GHz Wi-Fi Embedded Antenna

2.4 GHz Wi-Fi Embedded Antenna
WPANT10048-S1C
Note: Prototype shown
Description / Application
This low-profile antenna is designed to perform efficiently especially when installed on metallic surfaces. Good efficiency and ease of
integration make this an ideal choice for applications where space is a constraint. This antenna comes with metallic double stick tape
on the back for easy installation. Standard cable is 5.2’’ long micro co-ax and connector is IPX / Hirose equivalent.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency
Approximate Antenna Impedance [Ω]
VSWR – Typical
Peak Gain [dBi] (Typical)
Efficiency [%] (Typical)
Polarization
Pattern
2.4 – 2.5 GHz
50Ω
< 2:1
~ 2 dBi
50 – 60 %
Linear
Directional (Patch style)
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Tape
Operating / Storage Temperature
Environmental
Hazardous Materials
1.8’’ X 0.7’’ X 130mils including tape (45mm X 18mm X 3.2mm)
Black
4.53’’ long 1.32mm OD Micro Coax
(4.53’’ is from the edge of the antenna; Total length is 5.2’’)
IPX / Hirose equivalent
3 mils thick Metallic Double stick
-40^oC to +90^oC
Meets standards for UL 94V-0
RoHS Compliant
Rev: 1.0
Created on: December 13, 2013
Created by: MKS
Approved by: BP
Page | 1