WPANT10022-C2D Datasheet, PDF (1/3 Pages) World Produts Inc. – This stamped metal PIFA Antenna can be installed inside any wireless device

915 MHz PIFA Antenna
WPANT10022-C2D
Description / Application
This stamped metal PIFA Antenna can be installed inside any wireless device. It is a surface independent antenna, in the sense it
will work the same whether it is installed on a metallic or a non-metallic surface. It comes with a 3.15’’ long standard 1.32mm OD
Micro Co-ax cable and IPX / Hirose equivalent connector.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency 900 – 930 MHz
Approximate Antenna Impedance [] 50Ω
VSWR – Typical < 2:1
Peak Gain [dBi] (Typical) Device and Application dependent
Efficiency [%] (Typical) Device and Application dependent
Polarization Linear
Pattern Omni-directional
Note: The above mentioned performance metrics were recorded with the antenna embedded inside the client’s device.
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Operating / Storage Temperature
Environmental
Hazardous Materials
1.9’’ X 1.8’’ X 0.6’’ (47.75mm X 46.5mm X 14.5mm)
Silver
3.15’’ long 1.32mm OD Micro Co-ax
IPX / Hirose equivalent
-40^oC to +90^oC
Meets standards for UL 94V-0
RoHS Compliant
Rev: 3.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 1