WPANT10008-SA Datasheet, PDF (1/5 Pages) World Produts Inc. – Dual-band Wi-Fi Embedded Antenna

WPANT10008-SA
Dual-band Wi-Fi Embedded Antenna
Description / Application
This is a 2.4 GHz & 5.4 GHz Dual-band Wi-Fi on board Stamped Metal PIFA Antenna, designed to be mounted on to a metal
surface. Broad bandwidth, excellent efficiency and ease of integration make this an ideal choice for applications where performance
is the key. The antenna comes with a 7.8’’ long U. FL cable and IPX / Hirose equivalent connector.
We can assist your engineers to optimize mounting positions for these antennas in your specific application and can further assist to
trouble shoot system integration issues such as TRP/TIS and FCC requirements. We specialize in developing customized Antenna
solutions. Please contact [e-mail] with your specific application requirements.
Electrical Properties
Operating Frequency* 2.4 – 2.5 GHz
Approximate Antenna Impedance [Ω] 50Ω
4.9 – 5.85 GHz
50Ω
VSWR – Typical* < 2:1
< 3:1
Peak Gain [dBi] (Typical)* ~ 1.5 dBi
3 to 5.5 dBi
Efficiency [%] (Typical)* 70 – 80 %
50 – 80 %
Polarization Linear
Linear
Pattern Near Omni-directional
Mounting Platform
Can be mounted to any Metal
Surface
Near Omni-directional
Can be mounted to any Metal Surface
*Note: These performance metrics were recorded with the Antenna installed on a circuit board, with the board layout as prescribed in the Application
Notes (please refer to the Application Notes).
Mechanical / Environmental Properties
Antenna Dimensions
Antenna Color
Cable
Connector
Operating / Storage Temperature
Environmental
Hazardous Materials
0.83’’ X 0.35’’ X 0.24’’ (21mm X 9mm X 6mm)
Metallic Silver
7.8’’ long 1.13mm OD micro coax / U.FL
IPX / Hirose equivalent
-40^oC to +90^oC
Meets standards for UL 94V-0
RoHS Compliant
Rev: 5.0
Created on: February 21, 2014
Created by: MKS
Approved by: BP
Page | 1