English
Language : 

WM8850 Datasheet, PDF (64/223 Pages) Wolfson Microelectronics plc – Multi-Channel High Definition Audio CODEC
WM8850
Pre-Production
S/PDIF RECEIVE TO DACS
It is possible to select S/PDIF Rx as the data source for the DACs on the WM8850, as described in
the “Stereo Headphone Playback” and “Stereo Line Playback” sections.
In this mode, SRC1 is bypassed, the Stream Format Verb in each of the DAC nodes becomes read-
only and are set according to the recovered sample rate. Figure 17 shows a simplified diagram of this
configuration.
Figure 17 S/PDIF Receive to DACs
w
PP, April 2011, Rev 3.2
64