WM8224 Datasheet, PDF (12/50 Pages) Wolfson Microelectronics plc – 60MSPS 3-Channel AFE with Multiple Device Operation and Programmable Automatic Black Level Calibration

WM8224
Production Data
Figure 3 One-channel CDS Operation (CDS=1)
Notes:
1. The relationship between input video signal and sample points is controlled by VSMP and RSMP.
2. When VSMP is high the input video signal is connected to the Video sampling capacitors.
3. When RSMP is high the input video signal is connected to the Reset sampling capacitors.
4. Non-CDS operation is also possible; VSMP, MCLK timing is unchanged, RSMP is not required in this mode but can be
used to control input clamping.
NON-CDS MODE (CDS=0)
Figure 4 Three-channel non-CDS Operation (CDS=0)
w
PD, Rev 4.1, June 2012
12