SME1400B-10 Datasheet, PDF (4/5 Pages) List of Unclassifed Manufacturers – Low Cost Broadband Surface Mount Mixer

SME1400B-10
Broadband Surface Mount Mixer
SME1400B-10 Mechanical Information
This package is RoHS-compliant. The plating material on the leads is AgPdPt.
It is compatible with a tin-lead (maximum 235 °C reflow temperature) soldering processes.
Application Circuit
SME1400B-10
PIN 8
LO
PIN 4
RF
PIN 6
IF
Notes:
1. Circuit board material: .014” FR-4, 4 layers, .062” total thickness
2. Blocking capacitors are required on the ports (pins 2, 5, 7) if any dc signal is present.
Outline Drawing
SME 1400B-10
XXXX
Product Marking
The component will be marked with an
“SME1400B-10” designator followed by an
alphanumeric lot code on the top surface of
the package.
Tape and reel specifications for this part are
located on the website in the “Application
Notes” section.
Land Pattern / Mounting Configuration
Notes:
1. Ground vias are critical for RF grounding considerations.
2. A minimum of 12 ground vias underneath the device are required.
3. Trace width depends on the PC board material and thickness.
ESD Information
 ^{ESD Classification: Class 1C}
Value:
Passes 1000V to <2000 V
Test:
Human Body Model (HBM)
Standard:
JEDEC Standard JESD22-A114
 ^{ESD Classification: Class IV}
Value:
Passes 1000 V
Test:
Charged Device Model (CDM)
Standard:
JEDEC Standard JESD22-C101
Functional Pin Layout
1
2
3
LO 8
4 RF
7
6
IIF
Pin No.
4
6
8
1, 2, 3, 5, 7
Backside Metal
5
Function
RF
IF
LO
GND
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.wj.com
Page 4 of 5 May 2007