SCG015_06 Datasheet, PDF (1/5 Pages) WJ Communication. Inc. – ¼ Watt, High Linearity InGaP HBT Amplifier

SCG015
¼ Watt, High Linearity InGaP HBT Amplifier
The Communications Edge ^TM
Product Information
Product Features
• 1800 – 2500 MHz
• +24 dBm P1dB
• +40 dBm OIP3
• 15 dB Gain
• 5 dB Noise Figure
• Single Positive Supply (+8V)
• Available in a lead-free / green
SOT-89 Package Style
Applications
• Mobile Infrastructure
• W-LAN / ISM
• RFID
• Defense / Homeland Security
• Fixed Wireless
Product Description
The SCG015 is a high dynamic range driver amplifier in a
low-cost surface mount package. The InGaP/GaAs HBT is
able to achieve performance over a broad range with +41
dBm OIP3 and +24 dBm of compressed 1dB power and is
housed in a lead-free/green/RoHS-compliant SOT-89 SMT
package. All devices are 100% RF and DC tested.
The product is targeted for use as a gain block/driver
amplifier for various current and next generation wireless
technologies such as CDMA, CDMA2000, and W-CDMA,
where high linearity and medium power is required. In
addition, the SCG015 will work for numerous other
applications within the 1800 to 2500 MHz frequency range.
Functional Diagram
GND
4
1
RF IN
2
GND
3
RF OUT
Pin No.
1
3
2, 4
Function
Input
Output/Bias
Ground
Specifications ⁽¹⁾
Typical Performance ⁽¹⁾
Parameter
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 ⁽²⁾
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
1800
13.5
16
+23
+37.5
85
Typ
2140
15
20
10
+24
+40
5
5
100
Max
2500
135
1. Test conditions unless otherwise noted: 25°C, Vsupply = +8 V, in tuned application circuit with
Rbias = 30 Ω.
2. 3OIP measured with two tones at an output power of +9 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 ⁽²⁾
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
Typical
1900
2140
16.5
15
-16
-20
-11
-10
+24
+24
+40
+40
5
5
2450
14.5
-12
-9
+23
+40
5
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
Device Current
RF Input Power (continuous)
Junction Temperature
Rating
-40 to +85 °C
-55 to +150 °C
180 mA
+15 dBm
+250 °C
Ordering Information
Part No.
Description
SCG015B-G
0.2 Watt, High Linearity InGaP HBT Amplifier
(lead-free/green/RoHS-compliant SOT-89 Pkg)
SCG015B-PCB1960 1960 MHz Fully Assembled Eval. Board
SCG015B-PCB2140 2140 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.wj.com
Page 1 of 5 October 2006