MPR7000 Datasheet, PDF (1/2 Pages) WJ Communication. Inc. – EPC Class 0/1 and 0+ in PCMCIA Type II Pkg.

Multi-Protocol MPR 7000 RFID Card
EPC Class 0/1 and 0+ in PCMCIA Type II Pkg.
Compact Efficient Low Cost
Product Features
Serial Interface Using 68-Pin PCMCIA Connector
Multi Protocol
• EPC Class 0 (read)
• EPC Class 1 (read and program)
• Class 0+ (read and program)
• Firmware Upgrade (UHF G2 & others)
Multiple Antenna Ports
• Two Separate Antennas
• 50 Ohm MMCX Coax Connectors
PCMCIA Type II PC Card™ Physical Package
FCC Approved—FCC ID: NTTWJMPR7XXX
Just plug it in, install it and read tags...
WJ’s MPR 7000 RFID Card provides breakthrough performance in a
standard PCMCIA Type II package. These readers represent a new level
for size, standards-based compatibility, ease of use and performance.
Each RFID Card includes the analog RF, digital circuitry and embedded
firmware required for EPC Class 0 and EPC Class 1 operation. The
modular design is flexible, and a simple firmware upgrade is all that is
required to incorporate future standards—like UHF Gen 2—and new
features. The MPR 7000 leverages the common PCMCIA Type II
package with serial communications and separate bias power
connections. Plug it into a PCMCIA Type II socket wired for serial
communications and operate it via a simple WJ GUI program. WJ’s
simple but powerful command set allows for fast creation of custom
applications via an open-source DLL. These readers enable a host of
reader and programmer solutions including handhelds, printers, smart
packaging, material handling and industrial products for today and the
future.
WJ Communications 401 River Oaks Parkway, San Jose, CA 95134 WWW.WJ.COM