ECG040_07 Datasheet, PDF (1/4 Pages) WJ Communication. Inc. – InGaP HBT Gain Block

ECG040
InGaP HBT Gain Block
Product Features
• DC – 4 GHz
• +18.5 dBm P1dB at 1 GHz
• +35 dBm OIP3 at 1 GHz
• 16 dB Gain at 1 GHz
• 5.5 dB Noise Figure
• Available in Lead-free / green
SOT-89 Package Style
• Internally matched to 50 Ω
Applications
• Mobile Infrastructure
• CATV / FTTX
• W-LAN / ISM
• RFID
• WiMAX / WiBro
Product Description
Functional Diagram
The ECG040 is a general-purpose buffer amplifier that
GND
offers high dynamic range in a low-cost surface-mount
4
package. At 1 GHz, the ECG040B typically provides 15.8
dB of gain, +35 dBm Output IP3, and +18.5 dBm P1dB.
The ECG040 consists of Darlington pair amplifiers using
the high reliability InGaP/GaAs HBT process technology
and only requires DC-blocking capacitors, a bias resistor,
and an inductive RF choke for operation. The device is
ideal for wireless applications and is available in a low-
cost, surface-mountable lead-free/green/RoHS-compliant
SOT-89 package. All devices are 100% RF and DC tested.
The broadband MMIC amplifier can be directly applied to
various current and next generation wireless technologies
such as GPRS, GSM, CDMA, and W-CDMA. In addition,
the ECG040 will work for other various applications within
the DC to 4 GHz frequency range such as CATV and
mobile wireless.
1
RF IN
2
GND
3
RF OUT
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
Specifications ⁽¹⁾
Parameter
Operational Bandwidth
Test Frequency
Gain
Output P1dB
Output IP3 ⁽²⁾
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 ⁽²⁾
Noise Figure
Device Voltage
Device Current
Units
MHz
MHz
dB
dBm
dBm
MHz
dB
dB
dB
dBm
dBm
dB
V
mA
Min
DC
12.8
Typ
1000
15.8
+18.5
+35
2000
15.3
22
16
+18
+35
5.5
4.8
70
Max
4000
1. Test conditions unless otherwise noted: 25 ºC, Supply Voltage = +6 V, Rbias = 16 Ω, 50 Ω System.
2. 3OIP measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance ⁽¹⁾
Parameter
Frequency
S21
S11
S22
Output P1dB
Output IP3 ⁽²⁾
Noise Figure
Units
MHz
dB
dB
dB
dBm
dBm
dB
500
16.0
-24
-27
+18.5
+35.5
4.6
Typical
900 1900
15.8 15.3
-24 -23
-23 -16
+18.5 +18
+35 +34.5
5.5 5.8
2140
15.1
-21
-16
+19
+30.5
3.8
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
Device Current
Junction Temperature
Rating
-40 to +85 °C
-65 to +150 °C
+12 dBm
130 mA
+250 °C
Ordering Information
Part No.
ECG040B-G
ECG040B-PCB
Description
InGaP HBT Gain Block
(lead-free/green/RoHS-compliant SOT-89 package)
700 –2400 MHz Fully Assembled Eval. Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.wj.com
Page 1 of 4 April 2007