ECG012 Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – 0.1 Watt, High Linearity InGaP HBT Amplifier

ECG012
0.1 Watt, High Linearity InGaP HBT Amplifier
The Communications Edge ^TM
Product Information
Product Features
• 60 – 2500 MHz
• +20 dBm P1dB
• +36 dBm Output IP3
• 14 dB Gain @ 900 MHz
• 12.5 dB Gain @ 1900 MHz
• Single Positive Supply (+3V)
• Available in a lead-free / green
SOT-89 Package Style
Applications
• Final stage amplifiers for Repeaters
• Mobile Infrastructure
• CATV / DBS
• Defense / Homeland Security
Product Description
Functional Diagram
The ECG012 is a high dynamic range driver amplifier in
a low-cost surface mount package. The InGaP/GaAs
HBT is able to achieve high performance across a broad
range with +36 dBm OIP3 and +20 dBm of compressed
1dB power. It is housed in a lead-free/green/RoHS-
compliant SOT-89 SMT package. All devices are 100%
RF and DC tested.
The ECG012 is targeted for use as a driver amplifier in
wireless infrastructure where high linearity and medium
power is required. An internal active bias allows the
ECG012 to maintain high linearity over temperature and
operate directly off a single +3 V supply. This
combination makes the device an excellent candidate for
transceiver line cards in current and next generation
multi-carrier 3G base stations.
GND
4
1
RF IN
2
GND
3
RF OUT
Function
Input
Output/Bias
Ground
Pin No.
1
3
2, 4
Specifications ⁽¹⁾
Parameters
Operational Bandwidth
Test Frequency
Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3 ⁽²⁾
IS-95A Channel Power
@ -45 dBc ACPR
Noise Figure
Operating Current Range
Device Voltage
Units
MHz
MHz
dB
dB
dB
dBm
dBm
dBm
dB
mA
V
Min
60
11
65
Typ
1900
12.5
15
10
+20
+36
+13
4.9
100
+3
Max
2500
145
1. Test conditions unless otherwise noted: 25 ºC, Vsupply = +3 V, in a tuned application circuit.
2. 3OIP measured with two tones at an output power of +6 dBm/tone separated by 1 MHz. The
suppression on the largest IM3 product is used to calculate the 3OIP using a 2:1 rule.
Typical Performance ⁽³⁾
Parameters
Frequency
S21 - Gain
S11 - Input R.L.
S22 - Output R.L.
Output P1dB
Output IP3
Noise Figure
Supply Bias
Units
MHz
dB
dB
dB
dBm
dBm
dB
Typical
900 1900 2140
14
12.5 11.5
-14
-15
-15
-10
-10
-10
+20 +20 +20
+35 +36 +36
4.7
4.9
5.4
+3 V @ 100 mA
3. Typical parameters reflect performance in a tuned application circuit: Supply Voltage = +3 V, I =
100 mA, +25 °C
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
Device Voltage
Device Current
Junction Temperature
Rating
-40 to +85 °C
-65 to +150 °C
+15 dBm
+6 V
220 mA
+250 °C
Ordering Information
Part No.
Description
ECG012B-G
0.1 Watt, High Linearity InGaP HBT Amplifier
(lead-free/green/RoHS-compliant SOT-89 Pkg)
ECG012B-PCB900 900 MHz Evaluation Board
ECG012B-PCB1900 1900 MHz Evaluation Board
ECG012B-PCB2140 2140 MHz Evaluation Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: [phone] • e-mail: [e-mail] • Web site: www.wj.com
Page 1 of 4 October 2006