WS3413E Datasheet, PDF (2/9 Pages) List of Unclassifed Manufacturers – Non-isolated Buck APFC Offline LED Driver

WS3413E ProductDescription
Pin Configuration and Marking Information
The WS3413E is available in SOP7/DIP7 Package，the top marking is shown as below:
WS3413ES7P
A：Product Code
X：Internal Code
BCY：Internal Code For QC
YMX：D/C
WS3413ED7P
A：Product Code
X：Internal Code
BCY：Internal Code For QC
YMX：D/C
Pin Definition
Name
Pin No.
COMP
1
GND
2
VCC
3
FB
4
D
5/6
CS
7
Internal Block Diagram
Description
Loop Compensation Node. This pin connects a capacitor to GND for stabilization of the
control loop, achieving accurate LED current, high Power Factor and low THD.
Ground.
Power Supply Pin. Connect a bypass capacitor from this pin to GND.
Feedback Voltage Input Pin. This pin detects the inductor demagnetization signal and the
output voltage.
Internal HV Power MOSFET Drain.
Current Sense Pin. Connect a resistor to GND to sense the inductor current.
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
www.winsemi.com Tel : [phone] Fax : [phone]
WINSEMI MICROELECTRONICS
WINSEMI MICROELECTRONICS
2/9