|
MB5005 Datasheet, PDF (1/1 Pages) Micro Commercial Components – 50 Amp Single Phase Bridge Rectifier 50 to 1000 Volts | |||
|
SINGLE-PHASE BRIDGE RECTIFIER
RoHS
MB5005-5010
WEJ ELECTRONIC CO.,LTD FEATURES
Low cost
High forward surge current capability low thermal resistance.
High isolation voltage from case to lugs.
High temperature soldering guaranteed:
260/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA
Case: Molded body
Terminal: Plated 0.25" (6.35mm) lug.
Polarity: Polarity symbols marked on case.
Mounting: Thru hole for #10 screw, 20 in - lbs. Torque max
Weight: 0.84ounce, 24gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
SYMBOLS MB5005
Maximum Repetitive Peak Reverse Voltage
VRRM
Maximum RMS Voltage
VRMS
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Output
Current, at TC = 50 (Note1, 2)
I(AV)
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
IFSM
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
I2t
Maximum Instantaneous Forward Voltage Drop
per bridge element at 25A
VF
Maximum DC Reverse Current at rated TA = 25
DC blocking voltage per element
TA
IR
Isolation Voltage from case to lugs
VISO
Typical Thermal Resistance (Note 1, 2)
RJC
Operating Temperature Range
TJ
Storage Temperature Range
TSTG
MB501
MB502
MB504
MB506
(-65 to +150)
(-65 to +150)
MB508 MB5010 UNIT
Volts
Volts
Volts
Amps
Amps
A2s
Volts
Amp
mAmp
VAC
/W
1. Unit Mounted on 9" X 3.5" X 4.6" (23 X 9 X 11.8cm) Al. finned plate.
2. Bolt down on heatsink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency
with #10 screw.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:wej@yongerjia.com
|