MB1505W Datasheet, PDF (1/2 Pages) Bytes – SINGLE PHASE 15 AMP BRIDGE RECTIFIERS

RoHS
MB1505W-1510W
SINGLE-PHASE BRIDGE RECTIFIER
WEJ ^{ELECTRONIC CO.,LTD FEATURES}

Low cost

This series is UL recognized under component
index, file number E127707

High overload surge current capability

Low thermal resistance.

High isolation voltage from case to leads

High temperature soldering guaranteed:
260/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA

Case: Metal case

Terminal: Plated lead 0.04" (1.02mm) diameter.

Polarity: Polarity symbols marked on case.

Mounting: Thru hole for #10 screw, 20 in,- lbs. Torqute Max.

Weight: 0.93 ounce, 26.4gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load derate current by 20%
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOLS ^{15005W 1501W 1502W 1504W 1506W 1508W 1510W} UNIT
MB1505W MB151W MB152W MB154W MB156W MB158W MB1510W
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output
Current, at T_C = 55 (Note 1, 2)
V_RRM
V_RMS
V_DC
I_(AV)

   
  Volts

       Volts

   
  Volts

Amps
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
I_FSM
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
I²t

Amps

A²s
Maximum Instantaneous Forward Voltage Drop
per bridge element at 7.5A
V_F
Maximum DC Reverse Current at ratedT_A = 25
DC blocking voltage per element
T_A
  ^IR
Isolation Voltage from case to leads
V_ISO
Typical Thermal Resistance (Note 1,2)
R
_

Volts

A

mA

V_AC
2.0
/W
Operating Temperature Range
T_J
Storage Temperature Range
T_STG
(-65 to +150)

(-65 to +150)
1. Unit mounted on 5" X 4" X 3" (12.8cm X 10.2cm X 7.3cm)Al. finned Plate.
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting sutfae for maximum heat
transfer efficiency with # 10 screw.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[e-mail]