DF005S Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

RoHS
DF005S-DF10S
SINGLE-PHASE BRIDGE RECTIFIER
WEJ ELECTRONIC CO.,LTD FEATURES
Glass passivated chip junctions
Ideal for surface mounted applications
Low leakage
High forward surge current capability.
High temperature soldering guaranteed:
260^oC/10 seconds at terminals.
VOLTAGE RANGE
CURRENT
50 to 1000 Volts
1.0 Amperes
MECHANICAL DATA
Case:Transfer molded plastic
Epoxy:UL94V-0 rate flame retardant
Lead:Plated axial lead ,solderable per MIL-STD-202E
method 208C
Polarity:Molded on body
Mounting position:Any
Weight:0.04ounce,1.0 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperarure unless otherwise specified.
Single phase,half wave,60Hz,resistive or inductive load.
For capacitive load derate current by 20%
Dimensions in inches and (millimeters)
Maximum Repetitivi Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output
Current0.06 (1.5mm) lead length at TA=40 ^oC
(NOTE2)
SYMBOLS ^DF005S
DB101S
DF01S
DB102S
DF02S
DB103S
DF04S
DB104S
DF06S
DB105S
DF08S
DB106S
DF10S
DB107S
UNITS
VRRM
50 100 200 400 600 800 1000 Volts
VRMS
35 70 140 280 420 560 700 Volts
VDC
50 _{100 200 400 600 800 1000} Volts
I ( AV )
1.0
Amp
Peak Forward Surge Current
8.3ms single half sine-wave superimposed on
IFSM
rated load (JEDEC Method)
Rating for Fusing(t<8.3ms)
I t²
50
Amps
10
A²S
Maximum Instantaneous Forward Voltage Drop
per bridge element at 1.0A
VF
Maximum DC Reverse Current
at rated DC blocking voltage
TA=25 ^oC
TA=125 ^oC
IR
1.1
Volts
10
Amps
0.5
mAmps
Typical Junction Capacitance(NOTE1)
CJ
25
pF
Typical Thermal Resistance(NOTE2)
Operating and Storage Temperature Range
RQJA
TJ,TSTG
40
-65 to +150
O_C/W
O_C
NOTES:
1.Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts.
2.Unit mounted on P.C.B. With 0.51 X0.51 (13 X 13mm)copper pads.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[e-mail]