BR5005 Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER

SINGLE-PHASE BRIDGE RECTIFIER
RoHS
BR5005-5010
WEJ ^{ELECTRONIC CO.,LTD FEATURES}

Low cost

This series is UL recognized under component index,
file number E127707

High forward surge current capability low thermal resistance.

High isolation voltage from case to lugs.

High temperature soldering guaranteed:
260/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA

Case: Molded body

Terminal: Plated 0.25" (6.35mm) lug.

Polarity: Polarity symbols marked on case.

Mounting: Thru hole for #10 screw, 20 in - lbs. Torque max

Weight: 0.62ounce, 17.5gram(BR40)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
SYMBOLS BR5005 BR501 BR502 BR504 BR506 BR508 BR5010
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
V_RRM
V_RMS
V_DC
       Volts
        Volts
       Volts
Maximum Average Forward Rectified Output
Current, at T_C = 50 (Note1,2)
I_(AV)

Amps
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
I_FSM
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
I²t

Amps

A²s
Maximum Instantaneous Forward Voltage Drop
per bridge element at 25A
V_F

Volts
Maximum DC Reverse Current at rated T_A = 25
DC blocking voltage per element
T_A
 
I_R
Isolation Voltage from case to lugs
V_ISO
Typical Thermal Resistance (Note 1, 2)
R_JC
Operating Temperature Range
T_J
Storage Temperature Range
T_STG




(-65 to +150)
(-65 to +150)
Amp
mAmp
V_AC
/W

1. Unit Mounted on 9" X 3.5" X 4.6" (23 X 9 X 11.8cm) Al. finned plate.
2. Bolt down on heatsink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with
#10 screw.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[e-mail]