BR3505 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE SILICON BRIDGE RECTIFIER

SINGLE-PHASE BRIDGE RECTIFIER
RoHS
BR3505-3510
WEJ ^{ELECTRONIC CO.,LTD FEATURES}

Low cost

This series is UL recognized under component
index, file number E127707

High forward surge current capability

Integrally molded heatsink provide
very low thermal resistance.

High isolation voltage from case to lugs

High temperature soldering guaranteed:
260/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA

Case: Molded plastic body, Suffix "N" for thinner type.

Terminal: Plated 0.25" (6.35mm) lug.

Polarity: Polarity symbols marked on case.

Mounting: Thru hole for #10 screw, 20 in,- lbs. Torqute Max.

Weight: 0.66 ounce, 18.7gram(BR35)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output
Current, at T_C = 50 (Note 1)
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
SYMBOLSBR3505 BR351 BR352 BR354 BR356 BR358 BR3510 UNIT
V_RRM
    
  Volts
V_RMS

       Volts
V_DC
       Volts
I_(AV)

Amps
I_FSM

Amps
I²t

A²s
Maximum Instantaneous Forward Voltage Drop
V_F
per bridge element at 17.5A
Maximum DC Reverse Current at rated T_A = 25
DC blocking voltage per element
T_A
 
I_R
Isolation Voltage from case to lugs.
V_ISO
Typical Thermal Resistance (Note 1,2)
R
_
Operating Temperature Range
T_J




2.0
(-65 to +150)
Volts
A
mA
V_AC
/W

Storage Temperature Range
T_STG
(-65 to +150)
1. Unit mounted on 9" X 3.5" X 4.6" (23cm X 9cm X 11.8cm)Al. finned Plate.
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting sutfae for maximum heat
transfer efficiency with # 10 screw.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[e-mail]