BR1505 Datasheet, PDF (1/2 Pages) Rectron Semiconductor – SINGLE-PHASE SILICON BRIDGE RECTIFIER

RoHS
BR1505-BR1510
SINGLE-PHASE BRIDGE RECTIFIER
WEJ ^{ELECTRONIC CO.,LTD FEATURES}

Low cost

This series is UL recognized under component
index, file number E127707

High forward surge current capability

Intergrally molded heatsink provide
very low thermal resistance.

High isolation voltage from case to lugs.

High temperature soldering guaranteed:
260/10 second, at 5 lbs. (2.3kg) tension.
MECHANICAL DATA

Case: Molded plastic body, suffic "N" for thinner type

Terminal: Plated 0.25" (6.35mm) lug.

Polarity: Polarity symbols marked on case.

Mounting: Thru hole for #10 screw, 20 in,- lbs. Torqute Max.

Weight: 0.66 ounce, 18.7 gram(BR15)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load derate current by 20%
SYMBOLS BR1505 BR151 BR152 BR154 BR156 BR158 BR1510
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
V_RRM
V_RMS
V_DC

   
  Volts

       Volts

   
  Volts
Maximum Average Forward Rectified Output
Current, at T_C = 55 (Note 1, 2)
I_(AV)

Amps
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
I_FSM
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
I²t

Amps

A²s
Maximum Instantaneous Forward Voltage Drop
per bridge element at 7.5A
V_F
Maximum DC Reverse Current at ratedT_A = 25
DC blocking voltage per element
T_A
  ^IR
Isolation Voltage from case to lug.
V_ISO
Typical Thermal Resistance(Note 1,2)
R
_
Operating Temperature Range
T_J
Storage Temperature Range
T_STG




2.0
(-65 to +150)
(-65 to +150)
Volts
A
mA
V_AC
/W

1. Unit mounted on 5" X 4" X 3" (12.8cm X 10.2cm X 7.3cm)Al. finned Plate.
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting sutfae for maximum heat
transfer efficiency with # 10 screw.
WEJ ELECTRONIC CO. Http:// www.wej.cn E-mail:[e-mail]