HBC335R744 Datasheet, PDF (7/7 Pages) Winchester Electronics Corporation – Serial Digital BNC Connectors

EZ-RJ45™
The new patented EZ-RJ45™ connector simplifies installation by allowing the pairs to be inserted through the connector. There is no difficult
to handle liner or wire bar to deal with. Inspection of the correct conductor order is done before crimping so no connector is wasted because if
incorrect wiring. The conductors are able to be pulled forward so the pairs are very close to the contacts. This method allows the integrity of the
pairs to maintain Category Five, and even enhanced Category 5 and Category 6 capabilities. (50 u in. gold)
The EZ-RJ12™ and both EZ-RJ45™ can be crimped with most any standard tool, then trimmed with a cutter or small utility knife. However,
the new BD45000 crimp tool crimps and trims the exposed conductors in one operation. The vertical action of the tool makes a uniform and
positive crimp.
PartNo.
300566EZ
300568EZ
300668EZ
300668SEZ
BD45000
BD45000BL
CXB300EZ
CXB500EZ
CXB600EZ
Description
6P6C EZ-RJ12 Plug
8P8C EZ-RJ45 Category 5 Plug
8P8C EZ-RJ45 Category 6 Plug NEW
8P8C EZ-RJ45 Shielded Category 6 Plug NEW
- Crimp and Trim Tool for EZ RJ12, EZ RJ45 Cat 5 & 6
- Replacement Blades ( 2 per Pkg ) for BD45000 Tool
- Cable Boot with Strain Relief ( Required for Cat 6 )
- Cable Boot SNAGLESS Cat 5 (color: clear) NEW
- Cable Boot SNAGLESS Cat 6 (color: clear) NEW
REQUEST QUOTE REQUEST DRAWING
RJ12
RJ45
RJ45
RJ45
----
----
----
---- _{Video Demo}
----
BD45000 Crimp & Trim Tool
EZ-RJ45 Cat 6
Shielded with
SNAGLESS Boot
CXB500/600
Snagless Boot
Back to Index